ZH25MFD - Multi Function Display

The ZH25MFD has 5 isolated NMEA 183 RS422/485 inputs for sifnals such as WIND SENSOR, GPS, GYRO, SPEED LOG, etc. 3 Outputs NMEA 183 RS422 for VDR, ECDIS and 2 DRY CONTACT for connection to SIREN-HORN and FLASH LIGHT to upper bridge. 1 USB port for printer and one isolated ETH port for local alarm and audio.

8" Touch screen color display implements a GUI (Graphical User Interface) of data and saving the values of alarms in SD CARD (CSV File, Date, time, position, type of alarm, alarm ack.). Dual auto redundant isolated wide input supply 24VDc (9-36 VDc) with reverse polarity protection.

ZH25MFD Display-Recorder comes with maximum performance capabilities, implementing monitoring and alarm function operaion.


Features


Example screens

Screen1

Example screen for wind speed and direction.


Screen2

Example screen for panama canal


Downloads

Firmware 1.19 (HwVer BASE 1)
Firmware 1.19 (HwVer BASE 2)
Manual (PDF)
Leaflet

Specificaions

Sentences MWV, XDR,MTA,RPM, HDT, THS, ROT, RSA, VBW, VHW, DPT, DBS, DBT ,ZDA,VTG, RMC, VDR, VLW, GLL, VTG, HRC
Units Wind.Kn/Km/h/m/s Temp. C Distance.NM/Km Depth. M/Ft/Fm
Doppler Mode Water/Ground/Auto
Self Diagnosis Serial Ports,ROM,RAM,RTC
Power supply voltage 9-36VDc
Power consumption 2.5W
Supply isolation 500VAc@1 min
Supply surge protection 200A@3mSec
Output for Wind Sensor Voltage 24VDc
Output for Wind Sensor Current 250 ma
Output for Wind Sensor Heating Voltage 24VDc
Output for Wind Sensor Heating Current 3A
Number of Input – Output RS422/RS485 5
Number of Output RS422 3
RS 422/485 I/O Isolation 1000V
RS 422/485 I/O 1-5 Sensitivity 0.3V
RS 422/485 I/O Input Impedance 11KOhm
RS 422/RS 485 I/O Surge protection 60A@8,3mSec
RS 422 output Voltage (open Circuit) 4.5V
RS 422 output Voltage (110 Ohm Load) 3.8 V
RS 485/RS 422 I/O ESD Protection 60A@8,3mSec
Input – Output Bit Rate 115200
ETHERNET 10-100 Mbit
USB USB 2.0
SD Card 64 GB max
TFT Display Size 8 Inch
Display Angle View U50 D70 L70 R70
Display Color 256@65k
Dimer level 6 level or Auto
Dimensions 220mm x 180mm x 58mm
Compliance Standards IEC 60345, IACS E10, IEC 61162
Ambient Conditions Temp:-15-+55C
IP 20
Rel. Humidity: 0%-93%